Toshiba JKSSS Series Instruction Manual page 87

Basic Installation and Operation
Guide
MP.1 Metering (Metering Page 1)
Displays basic current metering data.
MENU
METERING PAGE 1
CURRENT METERED DATA
IA: ###### IB: ######
IC: ###### G/F: #####
I (AVG): ####
I/B: ## % RPM: ####
MOTOR LOAD % OF FLA
FLA: ### %
LINE FREQUENCY:: ##.##
PHASE ORDER: ###
THERMAL REGISTER
REMAINING: ### %
THERMAL CAPACITY
TO START: ### %
AVERAGE START TIME
TIME: ##.# SECS
AVG START CURENT
: ###### AMPS
I*I*T TO START
I*I*T: #######
LAST START
TIME: ##.# SEC
TOSHIBA
Screen 1: Phase A, B, C and ground fault (option) current.
Screen 2: Displays the average current, the percent of imbalance and the motor's
RPM (available with tachometer input)
Screen 3: Displays the motor load in percent of motor FLA.
Screen 4: Displays the line frequency and the present Phase Order.
Screen 5: Displays the percent of the remaining thermal register. In order for the
motor to successfully start, the percentage must be greater than the thermal
capacity required for a successful start.
Screen 6: Displays the thermal capacity required to successfully start the motor.
Screen 7: Displays the average time required to start.
Screen 8: Displays the average current during start.
Screen 9: Displays the measured I2T required to start the motor.
Screen 10: Displays the amount of time required to start the motor during the last
successful start.
JKSSS Series Solid State Soft Starters
74