Set The Indoor Unit As Being Out Of The Scope Of Management - Toshiba TCB-SC640U Installation Manual

Central Remote Controller

Set the indoor unit as being out of the scope of management.

Delete zone setting
IMPORTANT
After "Delete zone setting", the number of controlled/monitored units will be 0. Reset any zone.
On the "Zone List" screen, select "Del" then press
[ ] (Confirm)
The display returns to the "Address List" screen.
• The zone number is deleted and will not be included in the number of units
on the All screen.
1
On the "Zone Settings" screen, select "Delete zone
setting" then press [ ] (Confirm)
The "Delete zone setting" confirmation screen appears.
2
Press [˄] and [˅] to select "Yes", then press [ ]
(Confirm)
"It has been deleted" appears and the display returns to the "Zone Settings"
screen.
Installation Manual
23
-EN