Pinion Shaft Rebuild - Toro Diesel Z Master Service Manual

34. Install the key into the shaft keyway (Fig. 963).
Fig 963
35. Place the cross shaft in a press with the installed
bearing down.
36. Align the keyway in the pinion gear with the key
installed in the shaft. Press the pinion gear onto the
shaft (Fig. 964).
Fig 964
Z580/Z593/Z595 Diesel Service Manual
37. Press the bearing onto the shaft (Fig. 965).
IMG-8519

Pinion Shaft Rebuild

38. Press a new bearing race into the outer end of the
pinion housing (Fig. 966).
IMG-8529
MOWER DECKS
Fig 965
Fig 966
IMG-8530
7
IMG-8532
7-75