Table of Contents
Advertisement
Note: Check the clearance between the hood screen
and the radiator cap. If there is any interfer-
ence, the hood can be adjusted using the
slotted holes in the hood mounting brackets:
Hood Hinge Plate adjustment slots (Fig. 087).
Fig 087
Hood Pivot Plate adjustment slots (Fig. 088).
Fig 088
Z580/Z593/Z595 Diesel Service Manual
2. Install a clevis pin, washer and hairpin into each of
the pivot brackets (Fig. 089).
3. Lower the hood down and hook the rubber latch
PICT-4215
located at the rear of the hood (Fig. 090).
PICT-4206
CHASSIS
Fig 089
IMG_7844
Fig 090
IMG_7836
3
3-23
Advertisement
Table of Contents
