Checking Alternator Belt Tension - Toro Diesel Z Master Service Manual

Table of Contents

Advertisement

11. Position the right hand top brace. Install 3 bolts,
washers and nuts securing the right hand top brace
to the frame and rear radiator support (Fig. 633).
Fig 633
12. Install the negative battery cable to the battery.
13. Lower the seat.
Z580/Z593/Z595 Diesel Service Manual

Checking Alternator Belt Tension

1. Check the tension of the alternator belt. There
should be 1/4" to 11/32" defl ection in the belt
between the engine and alternator pulleys with 22.1
lbs. of force (10kgf) (Fig. 634).
PICT-3421
A. Alternator
B. Alternator belt
C. Defl ection, 1/4" to 11/32"
(7 to 9mm) with 22.1 lbs.
of force (10kgf)
2. If the belt tension needs adjustment, refer to "Ten-
sioning the Alternator Belt" on page 5-62.
ENGINE
E
D
A
B C
Fig 634
D. Top bolt
E. Bottom bolt
5
fi g. 61 G000968
5-61

Advertisement

Table of Contents
loading

This manual is also suitable for:

Z580-dZ593-dZ595-d

Table of Contents