Toro Diesel Z Master Service Manual page 61

CHASSIS
3. Position the fl ange bearing on the right end of the
cross shaft and install 2 bolts and nuts securing the
fl ange bearing to the frame (Fig. 143).
3
4. Position the fl ange bearing up to the left side of
the frame and install 2 bolts and nuts to secure the
fl ange bearing to the frame (Fig. 144).
3-38
Fig 143 PICT-2958a
Fig 144 PICT-2960
5. Ensure the brake cross shaft rotates freely in the
fl ange bearings.
6. Install the clevis spring pin securing the brake rod
linkage yoke to the right side of the brake cross shaft
(Fig. 145).
Fig 145
7. Install the clevis spring pins securing the brake rod
linkage yoke to the left side of the brake cross shaft
(Fig. 146).
Fig 146
Z580/Z593/Z595 Diesel Service Manual
PICT-2956
PICT-2954