Toro Diesel Z Master Service Manual page 303

MOWER DECKS
57. Check the cross shaft end play measurement,
it should be between .004" and .012" (.101 and
.305mm). Adjust the open end cap shims to adjust
backlash (Fig. 983).
58. Install .013" (.33mm) thickness of shims onto the
pinion housing (Fig. 984).
Note: The shim color corresponds to its thickness:
Blue: .005" (.127mm) thick
Green: .003" (.076mm) thick
Brown: .010" (.254mm) thick
7
7-80
Fig 983 IMG-8564
Fig 984 IMG-8567
59. Install a new o-ring on onto the pinion housing (Fig.
985).
Fig 985
60. Insert the pinion shaft assembly into the gearbox
assembly seating the pinion gear into the cross shaft
gear (Fig. 986).
Fig 986
Z580/Z593/Z595 Diesel Service Manual
IMG-8569
IMG-8570a