Toro Diesel Z Master Service Manual page 173

ENGINE
47. Loosely install 10 bolts, nuts and 2 washers securing
the radiator assembly to the frame (Fig. 541).
Note: There are 8 bolts and nuts securing the front
end of the radiator and 2 bolts, washers and
nuts securing the rear end of the radiator.
5
48. Tighten (in the following order):
a. The 8 front radiator assembly mounting bolts and
nuts.
b. The 2 rear radiator assembly mounting bolts, nuts
and washers
c. The 2 lower bolts and nuts securing the rear radiator
support to the frame.
5-36
Fig 541 PICT-3553
49. Slide the right hand radiator hose onto the water
pump (Fig. 542).
Fig 542
50. Slide the hose clamp into position and tighten (Fig.
543).
Fig 543
Z580/Z593/Z595 Diesel Service Manual
PICT-3685
PICT-3686