Table of Contents
Advertisement
11. Remove the tapered roller bearing from the bottom
of the spindle (Fig. 739).
Fig 739
12. Using a hammer and a driver with a square edge,
drive both the top and bottom bearing races out of
the spindle housing (Fig. 740).
Fig 740
Z580/Z593/Z595 Diesel Service Manual
13. Remove the large spacer in the spindle housing (Fig.
741).
CLR DSC-2680
14. This view shows the 2 bearing races and the large
spacer in the spindle housing (Fig. 742). Note the
internal snap ring in the housing; it is not necessary
to remove it when installing new bearing races and
the spacer.
CLR DSC-2681
A. Bearing Race
MOWER DECKS
Fig 741
A
B
Fig 742
B. Spacer
CLR DSC-2682
7
A
CLR DSC-2684
7-15
Advertisement
Table of Contents
