MOWER DECKS
7. Remove the belt from around the adjustment plate
pulley.
8. Remove the nut from the pivot bolt (Fig. 913).
Note: The pivot bolt will fall through to the under-
side of the deck when the nut is removed.
9. Remove the nut and washer from the adjustment
plate slot bolt (Fig. 914).
7
7-62
Fig 913
6666a
Fig 914
6667a
10. Remove the tension adjustment plate assembly (Fig.
915).
Fig 915
11. Remove the 2 spacers from the mower deck (Fig.
916).
Fig 916
Z580/Z593/Z595 Diesel Service Manual
PICT-6668a
6669a