Toro Diesel Z Master Service Manual page 299

MOWER DECKS
39. Press a new bearing race into the inner end of the
pinion housing (Fig. 967).
40. Place the pinion shaft assembly in a press and press
the bearing onto the shaft (Fig. 968).
7
7-76
Fig 967 IMG-8534
Fig 968 IMG-8540a
41. Slide the bearing and shaft assembly into the pinion
housing (Fig. 969).
Fig 969
42. Place the assembly into a press and press a new
bearing into the pinion housing (Fig. 970).
Fig 970
Z580/Z593/Z595 Diesel Service Manual
IMG-8541
IMG-8542a