Toro Diesel Z Master Service Manual page 158

7. Position the stub shaft to the fl ywheel (Fig. 481).
Fig 481
8. Install the 5 mounting bolts securing the stub shaft to
the fl ywheel. Torque the mounting bolts to 145 + 20
in-lbs. (196 + 27 Nm) (Fig. 482).
Fig 482
Z580/Z593/Z595 Diesel Service Manual
9. Install the 3 sets of engine isolation mounts and the
3 isolation mount spacers (Fig. 483).
PICT-3642
Note: The frame bracket is sandwiched between
the engine isolation mounts with the spacer
running through the middle (Fig. 484).
PICT-3647
ENGINE
Fig 483 PICT-3652
Fig 484 PICT-3628a
5
5-21