Advertisement
1.
Prepare for Installation
»
Exit Sidexis 4.
»
Verify that the Schick AE Sensor USB Interface is NOT
connected to the PC. If connected, disconnect the USB
Interface by unplugging the USB cable.
2.
Install the Sidexis 4 Sensor Plugin
»
Please type the following link
your browser, press Enter, and click on the Schick AE and
Sensors link to download the latest driver and firmware for
the Sidexis 4 Sensor Plugin.
»
Follow the on-screen instructions until installation is
complete.
3.
Verify Sidexis Server Connection
»
The Sidexis 4 Sensor Plugin configuration page will
display in your browser when installation is complete and
connection to the Sidexis server should be automatic.
When the connection is successful, the text box will be
outlined in green and include a green checkmark. If the text
box is outlined in red, please make sure you have entered
the server name or IP address correctly.
»
After entering the Sidexis server name correctly, click the
Save Configuration button to retain the connection setting.
Page 4
Installation
http://dsgo.to/schick
Getting Started with Schick AE
into
Advertisement
