Keysight Technologies P Series Service Manual page 108

5 Repair Guide
Instructions
Step 13:
– Attach the front panel sub-frame to the display
support moulding, ensuring that all plastic
clips are engaged to hold it securely
Step 14:
– Connect the flex cable to the display interface
board, and then tighten the locking tab
Step 15:
– Re-fit the calibrator plug
– This step is only applicable for calibrator
assembly with the calibrator plug.
– For more information on the improved
calibrator assembly, refer to
calibrator assembly" on page 79.
108
Visual
"Improved
Keysight N1911A/1912A Service Guide