Keysight Technologies P Series Service Manual page 100

5 Repair Guide
Instructions
Step 2:
– Use ODU socket to remove N1912-61806
sensor flex assembly
– Release the tab holding the flex cable to the
display interface board, and then disconnect it
Step 3:
– Disconnect the white plastic plug from the
display interface board
Step 4:
– Unlock the main plastic clip that holds the front
panel sub-frame and display support molding
together (situated beside the key flex circuit),
and carefully pull them apart to separate them
100
Visual
Flex cable
Keysight N1911A/1912A Service Guide
White plastic plug