3.6
Safety instructions during cleaning or maintenance
Preliminary requirements
•
Keep unauthorized personnel at a safe distance during cleaning or maintenance.
•
If for cleaning or maintenance it is necessary to remove safety devices,
immediately install the safety devices after the work.
•
Put on the correct personal protective equipment. Refer to section
3.7
Safety instructions for earthing
Preliminary requirements
•
Make sure that the EVSE is connected to an earthed, metal, permanent electrical
system. Alternatively, install an equipment-earthing conductor with circuit
conductors. Connect this earthing conductor to an equipment-earthing terminal
or lead on battery charger.
•
Make sure that the connections to the EVSE comply with all applicable local
rules.
3.8
Signs on the EVSE
Symbol
6AGA000007-0604-EN | 001
•
•
Risk type
General risk
Hazardous voltage that gives risk of electrocution
Risk of pinching or crushing of body parts
Rotating parts cat can cause a risk of entrapment
Safety
3.4
.
19