Siemens 7SR17 Rho Manual page 98

Chapter 2) 7SR17Rho Settings & Instruments
I
NSTRUMENT
Power S 3P Demand
Max
Min
Mean
Frequency Demand
Max
Min
Mean
MISCELLANEOUS METERS
to view
Start Alarm
Count
Target
Date
Time
Waveform Recs
Fault Recs
Event Recs
Data Log Recs
Setting Group
BINARY INPUT METERS
to view
BI 1-6
BINARY OUTPUT METERS
to view
BO 1-8
VIRTUAL METERS
to view
V 1-8
Chapter 2) Page 16 of 22
Displays the Apparent Power demand.
0.00VA
0.00VA
0.00VA
Displays the Frequency demand.
0.000Hz
0.000Hz
0.000Hz
This is the sub-group that includes indication such as the relays
time and date, the amount of fault and waveform records stored in
the relay TEST/RESET
1
DD/MM/YYYY This meter displays the date
HH:MM:SS Time and the number of
0 Waveform records
0 Fault records
0 Event records
0 Data log records stored in the relay
1
This is the sub-group that includes all the meters that are
associated with the Binary inputs
TEST/RESET
Displays the state of DC binary inputs 1 to 6 (The number of binary
---- --
inputs may vary depending on model)
This is the sub-group that includes all the meters that are
associated with the Binary Outputs
TEST/RESET
Displays the state of DC binary Outputs 1 to 8. (The number of
---- ----
binary outputs may vary depending on model)
This is the sub-group that shows the state of the virtual status
inputs in the relay
TEST/RESET
Displays the state of Virtual Outputs 1 to 8 (The number of virtual
---- ----
inputs will vary depending on model)
D
ESCRIPTION
allows access to this sub-group
allows access to this sub-group
allows access to this sub-group
allows access to this sub-group
©2014 Siemens Protection Devices Limited