Eventcount - Siemens 7SR17 Rho Manual

Chapter 4) 7SR17 Rho - Data Communications
Key
F# L Fault Number low byte.
F# H Fault Number high byte.
Meas Measurand format R32.23, sent least significant byte first.
The following tables show the fields in the different event records as they are returned.
Byte 0 1
Content 1 0
Byte 0 1
Content 2 0
Byte 0 1
Content 4 0

4.2.6 EVENTCOUNT

The EVENTCOUNT register contains the current number of events in the relay's event buffer.
On reception this register should be interpreted as a 16 bit integer.
4.2.7 TIME_METER
The TIME_METER register contains the device's time. The time must be read or written in one step;
therefore the quantity should be 4 registers. Failing to do this will result in an exception code 2. The
time format is 8 bytes as follows.
The following table describes the fields in the time.
Key
ms L Time Stamp Milliseconds low byte.
ms H Time Stamp Milliseconds high byte.
Mi Time Stamp Minutes (MSB = invalid, time not set > 23 hours).
Ho Time Stamp Hours (MSB = Summer time flag).
Da Time Stamp Days.
Mo Time Stamp Months.
Ye L Time Stamp Years low byte.
Ye H Time Stamp Years high byte (Not Used).
The following table shows the fields in the time as they are returned.
Chapter 4 - Page 26 of 75
2 3 4 5
FUN INF DPI 0
Event Type 1 Format.
2 3 4 5
RT
FUN INF DPI RT L
Event Type 2 Format.
2 3 4 5
FUN INF Meas
Event Type 4 Format.
Description
6 7 8 9 10
0 0 0 0 0
6 7 8 9 10
F# L F# H 0 0
H
6 7 8 9 10
0 0 0
Description
© 2013 Siemens Protection Devices Limited
11 12 13 14 15
ms
0 ms L Mi Ho
H
11 12 13 14 15
ms
0 ms L Mi Ho
H
11 12 13 14 15
ms
0 ms L Mi Ho
H