3.2
F
IXINGS
3.2.1
Crimps
Ring tongued crimps with 90 bend are recommended.
3.2.2
Panel Fixings
Typical mounting screw kit per Relay
Consists of 4 off M4x10mm Screws
4 off M4 Nuts
4 off M4 Lock Washer
Typical rear terminal block fixing kit (1kit per terminal block fitted to relay) Consists of:
28 off M4, 8mm Screws
28 off M4 Lock Washer
©2014 Siemens Protection Devices Limited
Chapter 5) 7SR17 Installation Guide
Page 9 of 18