Xylem OMNI sensus C2 User Manual page 33

Note: Be sure to first select the correct product configuration containing the
modified configuration parameters at activation start. See the FieldLogic Tools
Installation Guide.
1. From the Product Summary screen, select Configure.
2. From the Choose Product Configuration screen, select the button corresponding
with the applicable product configuration.
Note: The product configuration names listed vary depending on the
product configuration in use. You should ask your supervisor (or Sensus
representative) for guidance on the applicable product configuration to
choose.
Note: If no matching configurations are present, an error displays. Select OK
to return to the Product Summary screen.
6 Two-way SmartPoint modules | 33