Xylem OMNI sensus C2 User Manual page 27

Note: The product configuration names listed will vary depending on the
product configuration in use. You should ask your supervisor (or Sensus
representative) for guidance on the applicable product configuration to
choose.
Note: If no matching configurations are present, an error displays. Select OK
to return to the Product Summary screen. Contact your supervisor to obtain
the applicable product configuration.
18. The activation process begins. After successful activation, the Activate Success
confirmation message displays.
Note: During the activation process, setup and binding messages are sent to
the Base Station.
19. Select OK to return to the Product Summary screen. After the SmartPoint module is
activated, this screen displays additional options and information.
6 Two-way SmartPoint modules | 27