Table of Contents
Advertisement
1 Description
This document provides installation practice for the 588810200SK001 Battery Tray Kit.
The Vertiv™ NetSure™ +24V Battery Tray Kit, part number 588810200SK001, provides a 22" deep battery tray for 23" wide relay rack.
The battery tray holds four (4) 12V front terminal valve regulated lead acid (VRLA) batteries. Battery cabling is provided and shall be
connected to the system's main battery busbars. Batteries are configured as two (2) 24V strings per tray.
It is advisable that the procedure be conducted with the power plant shut down (all AC circuits to the rectifiers turned off and
battery disconnected). If this is not possible, extra care must be taken due to working with live DC power.
The materials included with the kit are listed here:
Qty.
Part No.
1
58881020011
2
256695900
4
245350005
1.33ft
182778000
1
528500
1
528501
2
528234
2
528236
2
528498
2
362736700
2
528155
2
524384
Description
Battery Tray, 23" Mount, 21" Depth
Circuit Breaker, 1-100Amp 80VDC
Crimp Lug
Heat Shrink Tubing
1-Pole Battery Disconnect Breaker Kit (Right)
1-Pole Battery Disconnect Breaker Kit (Left)
Kit, Battery lugs, 2AWG, 90deg, Short Tongue
Kit, Battery lugs, 2AWG, 90deg, Long Tongue
Bracket, Battery Tray Mounting
Bracket, Cable
2GA Lug and Cable Kit
Jumper for Battery Disconnect Breaker Alarm
Proprietary and Confidential © 2022 Vertiv Group Corp.
Vertiv™ NetSure™ +24V Battery Tray Kit Installation Manual
1
Advertisement
Table of Contents
