Welch Allyn Spot VS100 Basic Instructions page 13

APPENDIX
Basic Camera Care
1. Spot is a precision instrument. DO NOT drop it or subject it to physical shock.
2. Spot is NOT waterproof. If you accidentally drop it into liquid or liquid is spilled on it, please promptly
contact Welch Allyn Customer Service. If minor water droplets are found on Spot, please wipe them off
with a soft dry cloth.
3. DO NOT leave Spot in excessive heat such as in a car or in direct sunlight. High temperatures can cause
Spot to malfunction.
4. Spot contains precision electronic circuitry. Never attempt to disassemble Spot yourself. This will void
any warranty.
5. DO NOT use cleaners that contain organic solvents to clean Spot's body or front glass.
For stubborn dirt, use the provided cleaning cloth with a small amount of water or a nonabrasive cleaner.
6. When plugging the AC power connector into Spot, be sure NOT to force the power connector into the
Spot device as this may cause damage not covered under warranty.
7. The safety wrist strap on Spot is intended to assist in the event the device slips or is dropped. It is not
to be used to carry or support the weight of Spot.
Display Care
Spot has an all-in-one 5" LCD Display and touchscreen. To ensure long lasting
functionality and performance, please be aware of the following:
1. DO NOT push or scratch display surface with anything stiff or rigid.
2. DO NOT spill liquids on the display. Please wipe off drops of liquid like saliva and water
on LCD panel surface immediately.
Front Glass Care
Spot uses a piece of optical glass with a special coating. If dirt or fingerprints are visible, use a soft cloth
to wipe clean. For stubborn dirt, try using the provided cleaning cloth with a small amount of water or a
non-abrasive cleaner.