NOTE
These switches should be used only by the authorised service centers.
Disconnecting
To disconnect cables, use the same steps described above in reverse. If
Cables
exchanging cables, use Verifone-approved cables. See
Documentation
Mounting the
Use the following procedure to mount the UX700 to a suitable mounting surface.
Device
CAUTION
Ensure the mounting frame has a thickness between 2mm and 14mm.
Align the UX700 stud holes with the holes on the mounting surface.
To mount the unit
for cable part numbers and ordering information.
Mounting the Device
Accessories and
UX700 I
G
NSTALLATION
UIDE
S
ETUP
17