NOTE
Using the Smart
Card Reader
To Conduct a Smart
Card Transaction
Figure 7
Mounting the UX700
1
Place the reader flush onto the mounting slot.
2
Secure the unit with M5 nuts with a minimum length of 12 mm. Tighten the
nuts using the recommended torque of 7.0 kg-cm (6.1 lbf.in).
You can also mount the UX700 using welded screw bolts on the inner side of the
mounting plate. This prevents any vandalism of the screw heads on the outer
surface.
Insert the smart card to proceed with the EMV transaction. EMV supports credit
card and debit card transactions.
1
Position the smart card with the contacts facing upward (see illustration
below).
2
Insert the card into the reader slot in a smooth, continuous motion until it seats
firmly.
S
Using the Smart Card Reader
UX700 I
G
NSTALLATION
UIDE
ETUP
18