Dynamic Ip Connection - HIKVISION iDS-2CD8A46G0-IZHS User Manual

5. Visit the network camera through a web browser or the client software over the
internet.

Connecting the network camera with static IP directly
You can also save the static IP in the camera and directly connect it to the internet
without using a router. Refer to 2.1.2 Activating the Camera for detailed IP address
configuration of the network camera.

Dynamic IP Connection

Before you start:
Please apply a dynamic IP from an ISP. With the dynamic IP address, you can connect
the network camera to a modem or a router.
 Connecting the network camera via a router
Steps:
1. Connect the network camera to the router.
2. In the camera, assign a LAN IP address, the subnet mask and the gateway. Refer to
2.1.2 Activating the Camera for detailed IP address configuration of the network
camera.
3. In the router, set the PPPoE user name, password and confirm the password.
4. Set port mapping. E.g. 80, 8000, and 554 ports. The steps for port mapping vary
Network Camera User Manual
Accessing the Camera through Router with Static IP
Accessing the Camera with Static IP Directly
22