6. Click Save to save the settings.
Handling Exception
The exception type can be HDD full, HDD error, network disconnected, IP address
conflicted and illegal login to the cameras.
Steps:
1. Enter the Exception Settings interface: Configuration > Event > Basic Event >
Exception.
2. Check the checkbox to set the actions taken for the Exception alarm. Refer to Task
3: Set the Linkage Method for Motion Detection in 10.1.1 Configuring Motion
Detection.
3. Click Save to save the settings.
Configuring Flashing Alarm Light Output
Steps:
Network Camera User Manual
Flashing Alarm Light Output Settings
124