Table of Contents
Advertisement
configured area and it is widely applied to the entrances or exits.
Notes:
It is recommended to install the camera right above the entrance/exit. To improve the
counting accuracy, make sure your camera is installed horizontally.
Steps:
1. Enter the Counting Configuration interface: Configuration > People Counting.
2. Check Enable People Counting checkbox to enable the function.
3. Set the detection line.
An orange line, named as detection line can be set on the live video, and the
object entering or exiting through the line will be detected and counted.
•
Click
button on the left of the live view image. An orange line will
appear on the image.
•
Drag the detection line to adjust its position.
Network Camera User Manual
People Counting Configuration
157
Advertisement
Table of Contents
