Table of Contents
Advertisement
Configuring Alarm Output
Steps:
1. Enter the Alarm Output Settings interface: Configuration> Event > Basic Event >
Alarm Output.
2. Select one alarm output channel in the Alarm Output drop-down list. You can also
set a name for the alarm output (optional).
3. The Delay time can be set to 5sec, 10sec, 30sec, 1min, 2min, 5min, 10min or
Manual. The delay time refers to the time duration that the alarm output remains
in effect after alarm occurs.
4. Click Arming Schedule to enter the Edit Schedule Time interface. The time
schedule configuration is the same as the settings of the arming schedule for
motion detection Refer to Task 2: Set the Arming Schedule for Motion Detection
in 10.1.1 Configuring Motion Detection.
5. You can copy the settings to other alarm outputs.
Network Camera User Manual
Alarm Output Settings
123
Advertisement
Table of Contents
