Table of Contents
Advertisement
method for each rule, and click Save to save the settings.
Advanced Configuration
Face Capture Version: It lists the version of the algorithms library.
Configure the following parameters according to your actual environment.
Detection Parameters:
Generation Speed [1~5]: The speed to identify a target. The higher the value, the faster
the target will be recognized. Setting the value quite low, and if there was a face in the
configured area from the start, this face will not be captured. It can reduce the
misinformation of the faces in the wall painting or posters. The default value of 3 is
recommended.
Sensitivity [1~5]: The sensitivity to identify a target. The higher the value is, the easier
a face will be recognized, and the higher possibility of misinformation would be. The
default value of 3 is recommended.
Capture Parameters:
Face Capture Mode: Best Shot and Quick Shot are available.
•
Best Shot: The best shot after target leave the detection area.
Capture Times [1~10]: Refers to the capture times a face will be captured
Network Camera User Manual
Advanced Configuration
151
Advertisement
Table of Contents
