Server Chassis Features; Control Panel; Front Features - Supermicro SuperServer 5019S-WR User Manual

SuperServer 5019S-WR User's Manual

1.4 Server Chassis Features

Control Panel

The switches and LEDs located on the control panel are described below. See Chapter 4 for
details on the control panel connections.
1 2 3 4 5
Figure 1-1. Control Panel View
Control Panel Features
Item Feature Description
Depressing the UID (unit identifier) button illuminates an LED on both the front
1 UID Button and rear of the chassis for easy system location in large stack configurations.
The LED will remain on until the button is pushed a second time.
2 Universal Information LED Se table below for details.
3 NIC2 LED Indicates network activity on LAN port 2 when flashing
4 NIC1 LED Indicates network activity on LAN port 1 when flashing
5 HDD LED Indicates activity on a hard drive when flashing.
Indicates power is being supplied to the system power supply. This LED should
6 Power LED
normally be illuminated when the system is operating.
7 Reset Button The reset button is used to reboot the system
The main power button is used to apply or remove power from the power supply
to the server. Turning off system power with this button removes the main power
8 Power Button
but maintains standby power. To perform many maintenance tasks, you must
also unplug system before servicing
Information LED
Status Description
An overheat condition has occured.
Continuously on and red
(This may be caused by cable congestion.)
Blinking red (1Hz) Fan failure, check for an inoperative fan.
Local UID has been activated. Use this function to
Solid blue
locate the server in a rackmount environment.
Remote UID is on. Use this function to identify the
Blinking blue
server from a remote location.
10
6 7 8

Front Features

The SC815TQC-R504WB is a 1U chassis See the illustration below for the features included
on the front of the chassis.
1 1
4
Figure 1-2. Chassis Front View
Front Chassis Features
Item Feature Description
1 Hard Drive Carrier Carrier for hot-swap hard drive
2 DVD ROM Drive (Optional) Slim DVD-ROM drive
3 Control Panel Front control panel with LEDs and buttons (see preceding page)
4 Rack Ear Brackets Secures server chassis to the rack
11
Chapter 1: Introduction
3
2
1 1
4