Figure 74 Intrusion Event Actions
The event actions, detection area, and schedule are set refer to Motion
Detection.
Figure 75 Detection Area
Setting
To configure the settings for intrusion detection area, refer to
Smart Motion Area
Move the cursor to the drawing interface and click to generate a point.
Move the cursor to draw a line, and then click to generate another point.
This is how a line is generated. In this way, continue to draw lines to form
any shape, and right-click to finish line drawing.
Click REMOVRE ALL to remove detection area.
Configuring Network Settings
You can set NVR network parameters so that the NVR can communicate
with devices in the same LAN.
Honeywell 35 Series Network Video Recorder User Guide
61