Encode; Figure 41 Encode; Table 14 Audio/Video Parameters - Honeywell 35 Series User Manual

5. Choose the type of protocol. The default value is RTSP. Input the port
which depends on the IP camera.
6. Input the path, it depends on the manufacturer of cameras.
7. Click APPLY to save the settings.

Encode

You can set video bit stream parameters such as video format, resolution,
frame rate(fps), and so on.
Note: Some series products support three streams: main stream, sub stream
1, sub stream 2. The sub stream maximally supports 1080p.
1. Go to Main Menu > Camera > Encode.
The Encode interface is displayed.

Figure 41 Encode

2. Configure parameters.

Table 14 Audio/Video Parameters

Parameter
Channel
Smart encode
Video format
Resolution
Honeywell 35 Series Network Video Recorder User Guide
Description
In the Channel list, select the channel that you want to configure the
settings for.
Enable the smart encode function to reduce the video bit stream for non-
important recorded video to maximize the storage space.
In the Compression list, select the encode mode.
H.265: Main profile encoding. This setting is recommended.
H.264: Main profile encoding.
In the Resolution list, select resolution for the video.
The maximum video resolution might be different dependent on your
device model.
35