Snmp; Figure 88 Add Ip To Filter - Honeywell 35 Series User Manual

2. Enable the function, choose the rule type (blacklist or whitelist).
Black list: IP address in specified network segment to prohibit access.
White list: IP address in specified network segment to allow access
Select a name in the list and click Delete to delete the name from the
list.
Select a name in the list and click Edit to edit the name in the list.
Only one rule type is available, and the last rule type set is efficient.

Figure 88 Add IP to Filter

3. Click OK to save the IP filer.
4. Select the setting IP, click – to delete the IP segments.
5. Click APPLY to complete the settings.

SNMP

You can connect the device with some software such as MIB Builder and
MG-SOFT MIB Browser to manage and control the Device from the
software.
•
Install the software that can manage and control the SNMP, such as
MIB Builder and MG-SOFT MIB Browser
•
Obtain the MIB files that correspond to the current version from the
technical support.
Note: This function is for some series only.
1. Go to Main Menu > Networks > SNMP.
The SNMP interface is displayed.
72
Honeywell 35 Series Network Video Recorder User Guide