Local Basic Operation; Configuring Camera; Camera - Honeywell 35 Series User Manual

CHAPTER
3
Note: Slight difference may be found on the user interface. The following
figures are for reference only.
This chapter contains the following sections:
•
Configuring
•
Configuring Storage
•
Configuring Events
•
Configuring Network
•
Configuring System
•
Configuring Live View
•
Playback, page

Configuring Camera

Camera

Adding Camera
When you connect a camera to the NVR via PoE port, NVR automatically
initializes the camera. The NVR can activate and create new passwords for
new cameras, the password is the same as the created channel password
(Figure 16 Device Activation
By adding remote devices to the NVR, you can view the video on the NVR,
and manage and storage the video file. Different series products support
different remote device amount.
1. Go to Main Menu > Camera > Camera.
Performance Series Embedded NVR User Guide

LOCAL BASIC OPERATION

Camera, page
Settings, page
Settings, page
Settings, page
Settings, page
Settings, page
98
29
38
46
61
76
91
29