Figure 8 Rear Panel (Hn351602Xx); Table 9 Nvr Rear Panel Description (Hn351602Xx) - Honeywell 35 Series User Manual

Figure 8 Rear Panel (HN351602xx)

11

Table 9 NVR Rear Panel Description (HN351602xx)

No.
1
2
3
4
5
6
7
8
9
10
11
Honeywell 35 Series Network Video Recorder User Guide
Name
PoE port
Network port
AUDIO OUT
AUDIO IN
VGA
HDMI
USB port
ALARM I/O
Power input port
Power switch
Description
Built-in switch. Support PoE function.
For PoE series product, you can use this port to provide
power to the network camera.
100M/1000Mbps self-adaptive Ethernet port. Connect to
the network cable.
Audio output port. It is to output the analog audio signal
to the devices such as the sound box.
•
Bidirectional talk output.
•
Audio output on 1-window video monitor.
Audio output on 1-window video playback.
Bidirectional talk input port. It is to receive the analog
audio signal output from the devices such as microphone,
pickup.
VGA video output port. Output analog video signal. It can
connect to the monitor to view analog video.
High definition audio and video signal output port. It
transmits uncompressed high definition video and
multiple-channel data to the HDMI port of the display
device. HDMI version is 1.4.
USB port. Connect to mouse, USB storage device and etc.
They receive signals from external alarm source. C is COM
port. There is one channel of alarm in; There are eight
channels of alarm out.
When your alarm input device is using external power,
make sure the device and the NVR have the same GND.
Power socket.
Power on/off button.
GND
9