Figure 38 Select File - Honeywell 35 Series User Manual

Figure 38 Select File

After successful operation, system prompts update successful dialogue
box.
If there are too many same model cameras, select the cameras as needed,
and click BATCH UPDATE. Choose firmware file in the pop-up interface.
If you want to update the cameras remotely and the NVR can be accessed
by Web, you can update cameras at remote port.
For cameras connected with NVR by non-PoE port, select the camera(s) on
channel list and click DELETE to delete cameras in batch. Or click
delete the selected cameras. Cameras added by PoE port of NVR cannot
be delete here.
Operating online channel
1. Go to Main Menu > Camera > Camera. When the camera is online,
2. Click Update/Reboot/Reset to configure the cameras. For remote
Honeywell 35 Series Network Video Recorder User Guide
b. Select the update file and then click OK.
click .
network added cameras, you can click Modify IP to set the IP
information.
to
33