Storage Mode; Figure 48 Disk Interface - Honeywell 35 Series User Manual

To backup recorded video file, you can set HDD as redundant HDD.
1. Go to Main Menu > Storage > Disk.

Figure 48 Disk Interface

2. Select an HDD and then select disk group the drop-down list.
3. (Optional) Format an HDD.
Note: This operation will erase all data in the HDD. Proceed with caution.
If you format the HDD, the data will be lost.
5. Set Expired time(day), the expired time is not 0, the records will be
6. Click APPLY to complete the setup.

Storage Mode

When the NVR is installed several HDDs, you can configure the HDDS in
different groups, and the different HDDS can record the different
channels, so that users can access HDDS quickly and use the HDDs
efficient.
1. Go to Main Menu > Storage > Storage Mode.
Honeywell 35 Series Network Video Recorder User Guide
The Disk interface is displayed.
a. Select an HDD and then click FORMAT.
b. Click OK.
4. Enable Recording overwrite, when the disk is full, it will overwrite.
deleted when the time is over the setting value.
41