Figure 125 Add Tour Panel - Honeywell 35 Series User Manual

Parameter
Preset
Patrol

Figure 125 Add Tour Panel

Choose ID (There are four tour can be added), click EDIT to start set;
Click + to add preset to tour and set the duration of staying, repeat these
steps for many times to add more presets to tour.
Note:
The added preset cannot be deleted. It can only be overwritten.
Click SAVE to save tour; Click REMOVE ALL to clear preset.
Digital Zoom
You can zoom in specified zone of current channel so that you can view
the details. It supports zoom in function of multiple-channel. It includes
the following two ways:
•
Click
enlarge to 400%. the left mouse button is released digital zoom.
•
Point to the center that you want to enlarge, rotate the wheel button to
enlarge the area.
The digital zoom interface is shown as
the enlarged status, you can drag the image toward any direction to view
the other enlarged areas. Right click mouse to cancel zoom and go back to
the original interface.
96
Description
Move the PTZ camera to the point location, choose the ID, click SAVE to
add to preset; Choose one ID and click GO TO, then the PTZ camera go
to preset location directly.
There are 255 preset points at NVR, but PTZ cameras can be set 400
preset points; The NVR can only adjust the 1 to 255 preset points of
cameras.
The NVR set the patrols to adjust serval preset.
, the icon switches to
Honeywell 35 Series Network Video Recorder User Guide
. Move the mouse to enlarge, it up to
Figure 126. When the image is in