Table 2-1 Auto Identification Phase Angle Rules; Table 2-2 Auto Identification Series/Parallel Rules For Resistance Measurements - Keysight Technologies U1732C User Manual

The measurement mode (series or parallel) will be automatically identified from
the autoranging direction.
Table
Table 2-1 Auto identification phase angle rules
[1]
Phase angle
–Set < θ < +Set
θ ≥ +Set
θ ≤ –Set
[1] Where ±Set is the phase angle selected.
Table 2-2 Auto identification series/parallel rules for resistance measurements
Resistance range
200 MΩ
20 MΩ
2000 kΩ
200 kΩ
20 kΩ
2000 Ω
200 Ω
20 Ω
2 Ω
Keysight U1731C/U1732C/U1733C User's Guide
2-2, Table 2-3, and Table 2-4
Primary d isplay
R
L
C
Down range
Parallel
Parallel
Parallel
Parallel
Parallel
Parallel
Parallel
Series
Series
Features and Functions
list down the series/parallel rules used.
Secondary d isplay
θ
Q
D
Up range
Parallel
Parallel
Parallel
Parallel
Series
Series
Series
Series
Series
2
43