Measuring Capacitance (C); Figure 2-4 Capacitance Measurement With D Factor - Keysight Technologies U1732C User Manual

Measuring capacitance (C)

Set up your LCR meter to measure capacitance as shown in
To avoid electrical hazards, discharge the capacitor to be tested before
WARNING
measuring.
1 Press
2 Press
Figure 2-4
3 Insert a capacitor into the component socket or connect the test clip to the
4 Press
5 Read the displays.
Keysight U1731C/U1732C/U1733C User's Guide
to power on the LCR meter.
to select a suitable test frequency, and
Freq.
a press to enable the auto identification function; or
b alternatively press
Capacitance measurement with D factor
component leads as required.
to change the secondary display measurement (D, Q, or θ).
DQO
Limit
to select capacitance measurement.
ZLCR
P S
Features and Functions
Figure 2-5.
2
47