Keypad; Table 1-5 Keypad Functions - Keysight Technologies U1732C User Manual

Keypad

The operation of each key is explained below. Pressing a key enables a function,
displays a related annunciator, and emits a beep.
Each key operation of the U1731C/U1732C/U1733C keypad (shown in
is described in
more information on each function.
Table 1-5 Keypad functions
Function when pressed for:
Legend
Less than 1 second
Turns the LCR meter on or off.
Starts or stops the auto identification mode.
– Press
ESR
shown to exit this mode.
Holds or releases the present reading on the
display.
Hold
– Press
Hold
Rec
Rec
automatically once it is stable.
Save
– Press
Hold
Rec
mode.
Keysight U1731C/U1732C/U1733C User's Guide
Table 1-5. Click the respective "Learn more" pages in
again while the annunciator is
again to update the reading
for more than 1 second to exit this
More than 1 second
-
Enables or disables the ESR (equivalent series
resistance) mode.
– Press for more than 1 second to exit this
mode. The LCR meter will return to
capacitance measurement by default.
Starts or stops the static recording mode.
– Press again to cycle through the
Hold
Rec
maximum (Max), minimum (Min), average
(Avg), and present (MaxMinAvg) readings.
– Press for more than 1 second to exit this
Hold
Rec
mode.
Introduction 1
Figure 1-7)
Table 1-5 for
Learn more
on:
page 21
page 42
page 56
31