Table of Contents
Advertisement
Table 1-5
Keypad functions (continued)
Function when pressed for:
Legend
Less than 1 second
Sets the tolerance mode.
– Connect/insert an appropriate component into
the input terminals/sockets and press
Tol%
set the value shown on the secondary display
as the standard reference value.
– Press
Tol%
tolerance values (1% to 20%).
Sets the null/relative mode.
– The displayed value is saved as a reference to
Null
be subtracted from subsequent
Cal
measurements.
– Press
Null
Cal
Keysight U1731C/U1732C/U1733C User's Guide
again to cycle through the various
again to cancel the null mode.
More than 1 second
Turns the LCD backlight on for 15 seconds
(default) or off.
to
Tol%
– To change the backlight time-out refer to
"Changing the auto power-off and backlight
time-outs"
on page 87.
Enters the open/short calibration mode for the
selected range and test frequency.
– Follow the prompts on the screen (open or
short connector) and press
calibration process.
– The LCR meter will return to normal display
when the calibration is complete.
Introduction
Learn more
on:
page 54
and
page 22
page 61
and
to begin the
Null
Cal
page 62
1
33
Advertisement
Table of Contents
