Blocking Junk Faxes; Holding Faxes; Forwarding A Fax - Lexmark CX622 User Manual

Faxing

Blocking junk faxes

Note: Make sure that fax is configured. For more information, see
1
From the home screen, navigate to:
Settings > Fax > Fax Setup > Fax Receive Settings > Admin Controls
For non-touch-screen printer models, press
2
Set Block No Name Fax to On.

Holding faxes

Note: Make sure that fax is configured. For more information, see
1
From the control panel, navigate to:
Settings > Fax > Fax Setup > Fax Receive Settings > Holding Faxes
For non-touch-screen printer models, press
2
Select a mode.

Forwarding a fax

Note: Make sure that fax is configured. For more information, see
1
Create a destination shortcut.
a
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
b
Click Shortcuts > Add Shortcut.
c
Select a shortcut type, and then configure the settings.
Note: Take note of the shortcut number.
d
Apply the changes.
2
Click Settings > Fax > Fax Setup > Fax Receive Settings > Admin Controls.
3
In the Fax Forwarding menu, select Forward or Print and Forward.
4
In the Forward to menu, select the destination type and then type the shortcut number.
5
Apply the changes.
"Setting up the printer to fax" on page
to navigate through the settings.
"Setting up the printer to fax" on page 61
to navigate through the settings.
"Setting up the printer to fax" on page
73
61.
61.