Copying; Using The Automatic Document Feeder And Scanner Glass; Making A Copy; Copying Photos - Lexmark CX622 User Manual

Copying

Copying

Using the automatic document feeder and scanner glass

Automatic document feeder (ADF)
•
Use the ADF for multiple‑page or two-sided
documents.
•
Load an original document faceup. For multiple‑page
documents, make sure to align the leading edge
before loading.
•
Make sure to adjust the ADF guides to match the width
of the paper that you are loading.

Making a copy

1
Load an original document into the ADF tray or on the scanner glass.
Note: To avoid a cropped image, make sure that the original document and the output have the same
paper size.
2
From the control panel, select Copy, and then specify the number of copies.
If necessary, adjust the other settings.
3
Copy the document.
Note: To make a quick copy, from the control panel, press

Copying photos

1
Place a photo on the scanner glass.
2
From the control panel, navigate to:
Copy > Settings > Content > Content Type > Photo
For non-touch-screen printer models, press
3
From the Content Source menu, select the setting that best matches the original photo.
4
Copy the document.
Scanner glass
•
Use the scanner glass for single‑page documents,
book pages, small items (such as postcards or
photos), transparencies, photo paper, or thin media
(such as magazine clippings).
•
Place the document facedown in the corner with the
arrow.
.
to navigate through the settings.
48