Lexmark CX622 User Manual page 141

Understanding the printer menus
Menu item
Speed, Duplex
IPv4
All IPv6 Addresses
Reset Print Server
Network Job Timeout
Off
On* (90 seconds)
Banner Page
Off*
On
Scan to PC Port Range
Enable Network Connections
Off
On*
Enable LLDP
Off*
On
Note: An asterisk (*) next to a value indicates the factory default setting.
Wireless
Menu item
Setup Using Mobile App
Setup On Printer Panel
Choose Network
Add Wi‑Fi Network
•
Network Name
•
Network Mode
•
Wireless Security Mode (Disabled*)
Wi‑Fi Protected Setup
Start Push Button Method
Start PIN Method
Description
Show the speed of the currently active network card.
Show the IPv4 address.
Show all IPv6 addresses.
Reset all active network connections to the printer.
Note: This setting removes all network configuration settings.
Set the time before the printer cancels a network print job.
Print a banner page.
Specify a valid port range for printers that are behind a port blocking firewall.
Enable the printer to connect to a network.
Enable Link Layer Discovery Protocol (LLDP) in the printer.
Description
Configure the wireless connection using the Lexmark Mobile
Assistant app.
Determine the wireless network that the printer connects to.
Note: This menu item appears as Wireless Connection Setup in the
Embedded Web Server.
Establish a wireless network and enable network security.
Notes:
•
Start Push Button Method connects the printer to a wireless
network when buttons on both the printer and the access point
(wireless router) are pressed within a given time.
•
Start PIN Method connects the printer to a wireless network
when a PIN on the printer is entered into the wireless settings
of the access point.
141