Installing On An S7-300 Mounting Rail - Siemens SIMATIC NET SCALANCE XCM-100 Operating Instructions Manual

Installation and disassembly

6.4 Installing on an S7-300 mounting rail

6.4 Installing on an S7-300 mounting rail
Installation
Figure 6-3
To mount a SCALANCE XCM-100 to an S7-300 mounting rail, follow the steps below:
1. Place the second enclosure guide of the device on the top edge of the S7-300 mounting rail.
2. Press the device down against the S7-300 mounting rail until the spring-loaded securing bar
locks in place.
3. The device is correctly mounted when the back of the device is in contact with the front of
the S7-300 mounting rail without clearance.
30
Installing a SCALANCE XCM-100 on an S7-300 mounting rail
SCALANCE XCM-100 Media Converter
Operating Instructions, 07/2022, C79000-G8976-C659-01