P9391A Option ORX
The P9391A option ORX is a 2-slot streamline custom package optical to RF
converter with amplifier, demodulating the 1550 nm single mode optical signal to
RF. The optical converter can be used separately or with the amplifier. An RF jumper
cable is supplied to connect the amplifier section to the optical converter.
General Characteristics
Table 7
Performance
Optical RX Module
RF Frequency Range
Impedance
RF Output Return Loss
RF Connector
Optical Connector
Optical Wavelength
Optical Average Input Power Range
Optical Maximum Power In
Amplifier Module
RF Frequency Range
Input Power @ 0.1 dB Compression
10 MHz to 50 GHz
Input Power @ 1.0 dB Compression
10 MHz to 1 GHz
1 GHz to 50 GHz
Maximum RF Input Power
Gain
10 MHz to 26.5 GHz
26.5 GHz to 50 GHz
Impedance
Return Loss (RF Input/Output)
10 MHz to 26.5 GHz
26.5 GHz to 50 GHz
NF
1 GHz to 26.5 GHz
26.5 GHz to 50 GHz
RF Connectors
16
Specification
10 MHz to 50 GHz
50 Ohms
4 dB
2.4 mm (female)
FC/APC (female)
1550 nm
-20 to 13 dBm
16 dBm (40 mW)
Specification
10 MHz to 50 GHz
-22 dBm
-18 dBm
-15 dBm
-10 dBm
≥ 27 dB (Typical 30 dB)
≥ 24 dB (Typical 27 dB)
50 Ohms
-10 dB
-5 dB
≤ 7 dB
≤ 9 dB
2.4 mm (female)
Keysight P939xA Streamline Customs User's Guide