Quantum Q-LOGIC 3 Programming Manual page 31

Hide thumbs Also See for Q-LOGIC 3:
Table of Contents

Advertisement

New iOS 13.4.1 Update Feature - Mouse Cursor
With the launch of the new iOS 13.1.2, there is a new feature
in the operating system which can help an end user. Apple
has a mouse emulator. It works slightly different than normal
mouse clicks and movements, but is a quicker setup than
Assistive Switch Control (which is still available). It gives the
end user a choice of which is easier for them to use. Since
then iOS 13.4.1 has been launched with some different
navigation to change the pointer itself.
Enabling AssistiveTouch
1. Tap on Settings.
2. Tap on Accessibility (now easier to find).
3. Tap on Touch.
4. Tap on AssistieTouch (this will enable AssistiveTouch.
5. A new symbol will show up on the screen.
How to setup the Quantum Power Chair
1. From the Home Screen, give a left turn command to go
into Settings.
2. Highlight Bluetooth Operation and give a right turn
command.
3. Highlight Mouse and give a right turn command (check
box will check)
4. Go to the Home Screen again and now give a right turn
command.
5. Highlight Mouse Connections and give a right turn
command.
6. Highlight New and give a right turn command
7. Picture of the mouse will appear with the ID number.
Pair the power chair to the iPhone or iPad as you would a
computer mouse. Once the pairing is complete, the power
chair will work the iPhone much like a computer mouse. If
you have Dwell enabled on the power chair, left mouse click
will select whatever you are hovering over.
Changing cursor color and size:
1. Tap on Settings.
2. Tap on Accessibility.
3. Tap on Pointer Control (right hand side of the screen).
4. Here color and pointer size can be changed. This mimics
a computer's mouse cursor style.
Enable Dwell feature/set up timing:
1. Tap on Settings.
2. Tap on Accessibility.
3. Tap on Touch (right hand side of screen).
4. Tap on AssistiveTouch.
5. Swipe down to the bottom of the page and look for Dwell
Control and tap to the right to enable.
6. To adjust the dwell time, below Movement Tolerance,
look for a time and a - and + keys which will adjust the
timing that the cursor must be over the icon before it will
click.
BLUETOOTH ®
31

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Q-LOGIC 3 and is the answer not in the manual?

Table of Contents

Save PDF