Table of Contents
Advertisement
10. Click on the Save icon at the top of the Seat Configuration
Screen.
11. Take out of Programming Mode.
Mapping that Combined Latched Actuator
Function to a Switch
Now that the Combined Latched Actuator is programmed,
you can now program a Mapped I/O to that combined
function so it works through a press of a switch.
1. Once connected to the power chair, click on the Mapped
I/O icon on the top tool bar.
2. Next click on the Mapped I/O
3. Program the Mapped I/O like normal.
4. Make sure to Save and change the configuration of
either the Key or Mode Jack to Custom MIO.
SEAT
Program the output to the
Combined Latched Actuator
function programmed earlier in
this document.
23
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Q-LOGIC 3 and is the answer not in the manual?
Questions and answers
We are trying to decrease the speed of mouse movement without success. How to do it?
To decrease the speed of mouse movement for Quantum part number 3 (Q-Logic 3), follow these steps:
1. Push the Home Screen button.
2. Move the joystick right to access the Environmental Functions screen.
3. Use the joystick up or down to navigate to "Mouse Connections".
4. When "Mouse Connections" is highlighted, push the joystick right to enter its settings.
5. Adjust settings as needed to modify mouse speed.
Note: Specific speed adjustment options are not detailed, but they are likely within the "Mouse Connections" settings.
This answer is automatically generated